Product ID:YELLOW GLOSS ALKYD ENAMEL, 13655
MSDS Date:05/27/1987
FSC:8010
NIIN:00-598-5945
MSDS Number: BJLHY

EVERSEAL MFG CO INC

475 BROAD AVE
RIDGEFIELD, NJ 07657-2329
US

Emergency Phone: 201-943-4986

Info Phone: 201-943-4986 / FAX 201-943-1123

Cage: 72988

EVERSEAL MFG CO INC

RIDGEFIELD, NJ 07657-2329 US

Telephone: 201-943-4986

Cage: 72988

RESIN

Fraction By Weight: 30%

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 2 - 10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

LEAD CHROMATE - AS PB

CAS: 7758-97-6

RTECS: GB2975000

Fraction By Weight: 18%

OSHA PEL AS DUST

LEAD CHROMATE - AS CR

CAS: 7758-97-6

RTECS: GB2975000

Fraction By Weight: 4%

OSHA PEL 0.5 MG/M3

5 G/KG ORAL)

CAS: 64742-86-5

RTECS: LX3296500

Fraction By Weight: 38%

OSHA PEL 120 PPM

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:INHALATION: DIZZINESS, NAUSEA,
POSSIBLE UNCONSCIOUSNESS. IRRITATING TO SKIN AND EYES: FREQUENT AND
PROLONGED EXPOSURE TO LEAD CHROMATE DUST CAN CAUSE LIVER AND/OR
KIDNEY DAMAGE. SANDING, GRINDING, BLA STING OR WELDING OPERATIONS
SHOULD BE PERFORMED ONLY IF ADEQUATE PRECAUTIONS ARE TAKEN.
Explanation of Carcinogenicity:CHROMATES ARE CARCINOGENS.
Effects of Overexposure:INHALATION: DIZZINESS, NAUSEA, POSSIBLE
UNCONSICOUSNESS. IRRITATING TO SKIN AND EYES: FREQUENT AND
PROLONGED EXPOSURE TO LEAD CHROMATE DUST CAN CAUSE LIVER AND/OR
KIDNEY DAMAGE. SANDING, GRINDING, BLA STING OR WELDING OPERATIONS
SHOULD BE PERFORMED ONLY IF ADEQUATE PRECAUTIONS ARE TAKEN.

First Aid:INHALATION: REMOVE TO FRESH AIR. APPLY ARTIFICIAL RESPIRATION
IF NEEDED. SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER.
CONSULT PHYSICIAN.

Flash Point:105 F/41 C
Lower Limits:1
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR SELF CONTAINED
BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:WATER NOT A SUITABLE EXTINGUISHING MEDIA.

Spill Release Procedures:ENSURE ADEQUATE VENTILATION. REMOVE IGNITION
SOURCES. ABSORB SMALL SPILLS ON DRY ABSORPTION MATERIAL. USE
SPARK-PROOF SCOOP FOR LARGER SPILLS.

Handling and Storage Precautions:AVOID EXCESSIVE HEAT OR OPEN IGNITION
SOURCES.
Other Precautions:NPCA/HMIS RATING 3,2,0,H

Respiratory Protection:FUME AND DUST MASK OR AIR-SUPPLIED HOOD
Ventilation:ADEQUATE TO ENSURE LEL NOT ACHIEVED
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES
Other Protective Equipment:PROTECT SKIN WITH CLOTHING OR BARRIER CREAM
Supplemental Safety and Health

HCC:F4
Boiling Pt:B.P. Text:323 TO 390F
Vapor Density:> THAN AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:60

Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZING MATERIAL
Hazardous Decomposition Products:CARBON MONOXIDE AND/OR CARBON DIOXIDE
ON COMBUSTION

Waste Disposal Methods:DISPOSE OF AS PER LOCAL AND FEDERAL REGULATIONS
FOR HAZARDOUS WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.